TAKE-A-LABEL TAL-450 Electric Label Dispenser (with Photo Eye)

The TAL-450 with Photo Eye is our most commonly used dispenser.  The addition of the photo eye replaces the mechanical trip wire system for detecting the dispensed label.  This improves reliability and longevity of the unit.

The TAL-450 Electric Label Dispenser (with Photo Eye) is customizable with 4 different optional add-ons as well as 4 different motor options (descriptions listed below).

If you are interested in customizing the base model with more than one optional add-on you must call in your order at (330) 334-6406 to discuss your needs with a service representative.

General Overview:

Model TAL-450 has been the industry standard for over 40 years. Designed and built to work with almost any label construction. The TAL-450 is simple to operate and will keep up with production day after day.

Designed and built in the USA the TAL-450 is built with an eye to detail and durability. Featuring an adjustable unwind tension system as well as a vertical peel edge for a more ergonomic dispense. The TAL-450 has remained relatively unchanged for the last 40 years, and that is a testament to its design and durability.

Label Sizing:

• Minimum and Maximum Liner Width:  3/8" to 4-1/2" (A)
• Maximum Label Length:  1/2" to 25" (B)
• Maximum Roll Diameter:  12"  (C)
• Core Size:  1" or 3" Diameter (D)

Standard Features:

• Full Scrap Rewind with Quick Start/Removal Feature
• Label Roll Diameter Up to 12"
• Durable All Steel Frame with Powder Coat Finish
• Heavy Duty Motor with Built In Overload Protection
• Dispenses Die-cut or Butt-cut Labels
• Dispenses Multiple Labels On a Common Web

TAL-450 Specifications:

• Shipping Weight:  22 lbs.
• Electrical Requirements: 110V AC or 230AC (specify above which you prefer before ordering)
• Minimum and Maximum Liner Width:  3/8" to 4-1/2"
• Maximum Label Size:  4-1/2" x 25"
• Maximum Roll Diameter:  12"
• Label Roll Core Size:  1" or 3" Diameter
• Unit Dimensions:  L 20" x W 15" x H 13"

Motor Options:

• Standard Motor: the standard unit motor has a dispensing speed of just under 4" per second.  The drive of the motor is the waste shaft, so as the waste accumulates, the gear ratio changes, and the motor will begin to speed up.  Please be aware that standard unit motors will overheat after ~25 minutes of continuous run time.
• High-Speed Motor: the high-speed motor allows the user to set the speed from 0-9" per second.  This motor is a DC motor that is rated for continuous use forever.
• Constant Speed Motor: this motor uses the same drive system found on the Take-A-Label applicators which allows the dispensing speed to remain the same throughout use - this is found to be important in applications where there is a robot grabbing the labels off, or if there is a need to print on a label and the speed of the label cannot change over time (as seen with the standard motor)   
  • Smart Jet Inkjet Printer: the Smart jet Inkjet Printer is an optional printer that can be added to the constant speed motor unit.  This printer will print on virtually any label stock.  This printer is a great solution when you need to add an expiration date, a batch code or other information to a label prior to application.  Using a wireless keyboard the printer is easily programmed.  Using trusted Hewlett Packard technology and capable of printing up to 6 lines of information the Smart Jet Inkjet is a great solution for coding your label.  Printer only prints while the label roll is moving.

Optional Add-Ons:

• 18" Roll Adapter: use this if you are using a roll of labels that has up to an 18" diameter.  The base model has a maximum roll diameter of 12".

• Fan Fold Adapter: this adapter allows for use of fan folded labels.  This adapter can be taken on and off with the original setup.

• Heavy Duty Cooling Fan: this fan is mounted on the underside of the housing and is designed to run whenever the unit is "on."  The motor also still has its standard fan, but that only runs when the motor is going.  This add-on is ideal for hot work environments and/or for units that are planned to be in constant use.

• Label Counter: this add-on allows the user to have the labels used to be counted.